Table of Contents
Advertisement
pki-domain domain-name [ server-pki-domain domain-name ] [ prefer-compress zlib ] [ source
{ interface interface-type interface-number | ipv6 ipv6-address } ] *
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
-i interface-type interface-number: Specifies an output interface by its type and number for SCP
packets. Specify this option when the server uses a link-local address to provide the SCP service for
the client. The specified output interface on the SCP client must have a link-local address.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the name of the source file, a case-sensitive string of 1 to 255
characters.
destination-file-name: Specifies the name of the target file, a case-sensitive string of 1 to 255
characters. If you do not specify this argument, the target file uses the same file name as the source
file.
suite-b: Specifies the Suite B algorithms. If neither the 128-bit keyword nor the 192-bit keyword is
specified, all algorithms in Suite B are used. For more information about the Suite B algorithms, see
Table
64.
128-bit: Specifies the 128-bit Suite B security level.
192-bit: Specifies the 192-bit Suite B security level.
pki-domain domain-name: Specifies the PKI domain of the client's certificate. The domain-name
argument represents the PKI domain name, a case-insensitive string of 1 to 31 characters. Invalid
characters are tildes (~), asterisks (*), backslashes (\), vertical bars (|), colons (:), dots (.), angle
brackets (< >), quotation marks ("), and apostrophes (').
server-pki-domain domain-name: Specifies the PKI domain for verifying the server's certificate.
The domain-name argument represents the PKI domain name, a case-insensitive string of 1 to 31
characters. Invalid characters are tildes (~), asterisks (*), backslashes (\), vertical bars (|), colons (:),
dots (.), angle brackets (< >), quotation marks ("), and apostrophes ('). If you do not specify the
server's PKI domain, the client uses the PKI domain of its own certificate to verify the server's
certificate.
prefer-compress: Specifies the preferred compression algorithm for data compression between the
server and the client. By default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
source: Specifies a source IPv6 address or source interface for IPv6 SCP packets. By default, the
device automatically selects a source address for IPv6 SCP packets in compliance with RFC 3484.
As a best practice to ensure successful SCP connections, specify a loopback interface as the source
interface or specify the IPv6 address of the interface as the source IPv6 address.
475
Advertisement
Table of Contents
