Table of Contents
Advertisement
Parameters
dn-string: Specifies the administrator DN for binding with the server, a case-insensitive string of 1 to
255 characters.
Usage guidelines
The administrator DN specified on the device must be consistent with the administrator DN
configured on the LDAP server.
If you change the administrator DN, the change is effective only on the LDAP authentication that
occurs after the change.
Examples
# Specify the administrator DN as uid=test, ou=people, o=example, c=city for LDAP server ccc.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] login-dn uid=test,ou=people,o=example,c=city
Related commands
display ldap scheme
login-password
Use login-password to configure the administrator password for binding with the LDAP server
during LDAP authentication.
Use undo login-password to restore the default.
Syntax
login-password { cipher | simple } string
undo login-password
Default
No administrator password is configured.
Views
LDAP server view
Predefined user roles
network-admin
mdc-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 128 characters. Its
encrypted form is a case-sensitive string of 1 to 201 characters.
Usage guidelines
This command is effective only after the login-dn command is configured.
Examples
# Specify the administrator password as abcdefg in plaintext form for LDAP server ccc.
<Sysname> system-view
150
Advertisement
Table of Contents
