mdc-admin
Examples
# Configure Ten-GigabitEthernet 1/0/1 as an ND trusted interface.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] ipv6 nd detection trust
# Configure Bridge-Aggregation 1 as an ND trusted interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] ipv6 nd detection trust
reset ipv6 nd detection statistics
Use reset ipv6 nd detection statistics to clear ND attack detection statistics.
Syntax
reset ipv6 nd detection statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command clears ND attack detection statistics for all interfaces.
Examples
# Clear all ND attack detection statistics.
<Sysname> reset ipv6 nd detection statistics
RA guard commands
display ipv6 nd raguard policy
Use display ipv6 nd raguard policy to display the RA guard policy configuration.
Syntax
display ipv6 nd raguard policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
643