Display Port-Security Mac-Address Security - HP FlexNetwork 7500 Series Command Reference Manual

Table 32 Command output
Field
MAC ADDR
Port
VLAN ID
number mac address(es) found
Related commands
port-security intrusion-mode

display port-security mac-address security

Use display port-security mac-address security to display information about secure MAC
addresses.
Syntax
display port-security mac-address security [ interface interface-type interface-number ] [ vlan
vlan-id ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the secure MAC addresses.
Usage guidelines
Secure MAC addresses are those that are automatically learned by the port in autoLearn mode or
configured by the port-security mac-address security command.
If you do not specify any parameters, this command displays information about all secure MAC
addresses.
Examples
# Display information about all secure MAC addresses.
<Sysname> display port-security mac-address security
MAC ADDR
0002-0002-0002
--- Number of secure MAC addresses: 1 ---
# Display only the count of the secure MAC addresses.
<Sysname> display port-security mac-address security count
VLAN ID STATE
1 Secure
Description
Blocked MAC address.
Port having received frames with the blocked MAC
address being the source address.
ID of the VLAN to which the port belongs.
Number of blocked MAC addresses.
PORT INDEX
XGE1/0/1
312
AGING TIME
Not aged