Display Mka Statistics - HP FlexNetwork 7500 Series Command Reference Manual

Field
Previous SAK KI
Live peer list
Potential peer list
Rx-SCI
Related commands
reset mka session

display mka statistics

Use display mka statistics to display MKA statistics on ports.
Syntax
display mka statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If you do not
specify a port, this command displays MKA statistics on all ports.
Examples
# Display MKA statistics on GigabitEthernet 1/0/1.
<Sysname> display mka statistics interface gigabitethernet 1/0/1
Interface GigabitEthernet1/0/1 statistics
MKPDUs with invalid CKN : 0
MKPDUs with invalid ICV : 0
MKPDUs with Rx error
CKN for participant
Tx MKPDUs
Rx MKPDUs
MKPDUs with invalid MN: 0
MKPDUs with Tx error
SAKs distributed
SAKs received
Description
Key identifier of the previous SAK, a string of hexadecimal digits that contains
the key server's 12-byte MI and KN.
This field displays N/A in the following situations:
•
The MKA instance is not the principal actor.
•
The SAK does not exist.
List of peers that have participated in the MKA session.
This field is not available if no live peer exists.
List of peers that are being negotiated.
This field is not available if no potential peer exists.
SCI for inbound traffic, in hexadecimal notation.
: 0
: ABCD
: 2379
: 2375
: 0
: 0
: 5
675