HP FlexNetwork 7500 Series Command Reference Manual page 271

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays Web redirect rules for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
Web redirect rules for the global active MPU. (In IRF mode.)
Examples
# Display all Web redirect rules on VLAN-interface 100.
<Sysname> display web-redirect rule interface vlan-interface 100
IPv4 web-redirect rules on vlan-interface 100:
Rule 1:
Type
Action
Status
Source:
IP
VLAN
Rule 2:
Type
Action
Status
Source:
VLAN
Protocol
Destination:
Port
IPv6 web-redirect rules on vlan-interface 100:
Rule 1:
Type
Action
Status
Source:
VLAN
Protocol
Destination:
Port
: Dynamic
: Permit
: Active
: 192.168.2.114
: Any
: Static
: Redirect
: Active
: Any
: TCP
: 80
: Static
: Redirect
: Active
: Any
: TCP
: 80
256