HP FlexNetwork 7500 Series Command Reference Manual page 552

mdc-operator
Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive
string of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits,
underscores (_), and hyphens (-). If no attack defense policy is specified, this command displays
brief information about all attack defense policies.
Usage guidelines
This command output includes the following configuration information about an attack defense
policy:
•
Whether attack detection is enabled.
•
Attack prevention actions.
•
Attack prevention trigger thresholds.
Examples
# Display the configuration of attack defense policy abc.
<Sysname> display attack-defense policy abc
Attack-defense Policy Information
--------------------------------------------------------------------------
Policy name
Applied list
--------------------------------------------------------------------------
Exempt IPv4 ACL:
Exempt IPv6 ACL:
--------------------------------------------------------------------------
Actions: BS-Block source
Signature attack defense configuration:
Signature name
Fragment
Impossible
Teardrop
Tiny fragment
IP option abnormal
Smurf
Traceroute
Ping of death
Large ICMP
Max length
Large ICMPv6
Max length
TCP invalid flags
TCP null flag
TCP all flags
TCP SYN-FIN flags
TCP FIN only flag
TCP Land
Winnuke
UDP Bomb
: abc
: Local
: Not configured
: vip
L-Logging D-Drop
Defense
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
4000 bytes
Disabled
4000 bytes
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
537
N-None
Level
Info
Info
Info
Info
Info
Info
Medium
Low
Medium
Low
medium
Low
Info
Info
Info
Info
Info
Info
Actions
L
L
L
L
L
N
L,D
L
L,D
L
L,D
L
L
L
L
L
L
L