Ldap Scheme - HP FlexNetwork 7500 Series Command Reference Manual

Usage guidelines
Execute this command multiple times to create multiple LDAP attribute maps. You can add multiple
mapping entries to an LDAP attribute map. Each entry defines the mapping between an LDAP
attribute and an AAA attribute.
Examples
# Create an LDAP attribute map named map1 and enter LDAP attribute map view.
<Sysname> system-view
[Sysname] ldap attribute-map map1
[Sysname-ldap-map-map1]
Related commands
attribute-map

ldap scheme

map
ldap scheme
Use ldap scheme to create an LDAP scheme and enter its view, or enter the view of an existing
LDAP scheme.
Use undo ldap scheme to delete an LDAP scheme.
Syntax
ldap scheme ldap-scheme-name
undo ldap scheme ldap-scheme-name
Default
No LDAP schemes exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ldap-scheme-name: Specifies the LDAP scheme name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
An LDAP scheme can be used by more than one ISP domain at the same time.
You can configure a maximum of 16 LDAP schemes.
Examples
# Create an LDAP scheme named ldap1 and enter LDAP scheme view.
<Sysname> system-view
[Sysname] ldap scheme ldap1
[Sysname-ldap-ldap1]
Related commands
display ldap scheme
148