Table of Contents
Advertisement
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type
interface-number
{ ecdsa-sha2-nistp256 | ecdsa-sha2-nistp384 | rsa | { x509v3-ecdsa-sha2-nistp256 |
x509v3-ecdsa-sha2-nistp384 } pki-domain domain-name } | prefer-compress zlib
prefer-ctos-cipher { aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc |
aes256-ctr | aes256-gcm } | prefer-ctos-hmac { sha1 | sha1-96 | sha2-256 | sha2-512 } |
prefer-kex
prefer-stoc-cipher { aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc |
aes256-ctr | aes256-gcm } | prefer-stoc-hmac { sha1 | sha1-96 | sha2-256 | sha2-512 } ] *
[ { public-key keyname | server-pki-domain domain-name } | source { interface interface-type
interface-number | ipv6 ipv6-address } ] * [ user username [ password password ] ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
-i interface-type interface-number: Specifies an output interface by its type and number for SCP
packets. This option is used only when the server uses a link-local address to provide the SCP
service for the client. The specified output interface on the SCP client must have a link-local address.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the name of the source file, a case-sensitive string of 1 to 255
characters.
destination-file-name: Specifies the name of the target file, a case-sensitive string of 1 to 255
characters. If you do not specify this argument, the target file uses the same file name as the source
file.
identity-key: Specifies a public key algorithm for publickey authentication of the client. The default is
dsa in non-FIPS mode and is rsa in FIPS mode. If the server uses publickey authentication, you
must specify this keyword. The client generates the digital signature or certificate by using the local
private key that is associated with the specified algorithm.
•
dsa: Specifies the public key algorithm dsa.
•
ecdsa-sha2-nistp256: Specifies the ECDSA algorithm with 256-bit key strength.
•
ecdsa-sha2-nistp384: Specifies the ECDSA algorithm with 384-bit key strength.
•
rsa: Specifies the public key algorithm rsa.
•
x509v3-ecdsa-sha2-nistp256: Specifies the public key algorithm
x509v3-ecdsa-sha2-nistp256.
•
x509v3-ecdsa-sha2-nistp384: Specifies the public key algorithm
x509v3-ecdsa-sha2-nistp384.
•
pki-domain domain-name: Specifies the PKI domain of the client's certificate. The
domain-name argument is a case-insensitive string of 1 to 31 characters. When the x509v3
] { put | get } source-file-name [ destination-file-name ] [ identity-key
{
dh-group14-sha1
|
ecdh-sha2-nistp256
472
|
ecdh-sha2-nistp384
|
}
|
Advertisement
Table of Contents
