HP FlexNetwork 7500 Series Command Reference Manual page 324

Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
NAS-ID profile
Free VLANs
Open authentication
Table 31 Command output
Field
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
NAS-ID profile
Dot1x-failure trap
Dot1x-logon trap
Dot1x-logoff trap
Intrusion trap
Address-learned trap
Mac-auth-failure trap
Mac-auth-logon trap
Mac-auth-logoff trap
Open authentication
OUI value list
: Sticky
: Periodical
: 32
: 0
: Permitted
: Not configured
: Not configured
: Disabled
Description
Whether the port security feature is enabled.
Sticky MAC address aging timer, in minutes or seconds.
Silence period (in seconds) of the port that receives illegal packets.
Status of MAC move:
•
If the feature is enabled, this field displays Permitted.
•
If the feature is disabled, this field displays Denied.
Action to be taken for users that fail authorization:
•
Online—Allows the users to go online.
•
Offline—Logs off the users.
NAS-ID profile applied globally.
Whether SNMP notifications for 802.1X authentication failures are
enabled.
Whether SNMP notifications for 802.1X authentication successes
are enabled.
Whether SNMP notifications for 802.1X authenticated user logoffs
are enabled.
Whether SNMP notifications for intrusion protection are enabled. If
they are enabled, the device sends SNMP notifications after illegal
packets are detected.
Whether SNMP notifications for MAC address learning are
enabled. If they are enabled, the device sends SNMP notifications
after it learns a new MAC address.
Whether SNMP notifications for MAC authentication failures are
enabled.
Whether SNMP notifications for MAC authentication successes are
enabled.
Whether SNMP notifications for MAC authentication user logoffs
are enabled.
Whether global open authentication mode is enabled.
List of OUI values allowed for authentication.
309