Portal Nas-Port-Id Format - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
portal nas-id-profile profile-name
undo portal nas-id-profile
Default
No NAS-ID profile is specified for an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
profile-name: Specifies the name of a NAS-ID profile, a case-insensitive string of 1 to 31 characters.
Usage guidelines
A NAS-ID profile defines the binding relationship between VLANs and NAS-IDs. To configure a
NAS-ID profile, use the aaa nas-id profile command.
Portal access matches only the inner VLAN ID of QinQ packets. For more information about QinQ,
see Layer 2—LAN Switching Configuration Guide.
If an interface is specified with a NAS-ID profile, the interface prefers to use the bindings defined in
the profile.
If no NAS-ID profile is specified for an interface or no matching binding is found in the specified
profile, the device uses the device name as the interface NAS-ID.
Examples
# Specify NAS-ID profile aaa for VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa
Related commands
aaa nas-id profile

portal nas-port-id format

Use portal nas-port-id format to specify the NAS-Port-Id attribute format.
Use undo portal nas-port-id format to restore the default.
Syntax
portal nas-port-id format { 1 | 2 | 3 | 4 }
undo portal nas-port-id format
Default
The format for the NAS-Port-Id attribute is format 2.
Views
System view
285