Key Priority Setting; Setting The Key Priority In The Transition Control Block - Sony MVS-8000 User Manual

Key Priority Setting

You can select the key priority, that is, the order in which the keys are laid over
each other, in the current video and after the transition. There are two ways of
setting the priority: either using the [PRIOR SET] button in the transition
control block, or using the Misc menu to access the Key Priority menu for the
M/E or PGM/PST bank.

Setting the Key Priority in the Transition Control Block

The positions of the buttons used for the operation are as follows.
Next transition
selection buttons
KEY PRIOR button
PRIOR SET button
Changing the currently inserted key priority
Use the following procedure.
1
If the next transition selection button [KEY PRIOR] is on, press another
next transition selection button to turn the [KEY PRIOR] button off.
(When the [KEY PRIOR] button is on, the transition control block
switches to the mode for changing the key priority for after the transition.)
2
Holding down the [PRIOR SET] button, press the one of the next transition
selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] buttons in the
PGM/PST bank) for the key to appear on top.
ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4
BKGD KEY1 KEY2 KEY3
KEY
MIX NAM
PRIOR
PST
ALL COLOR WIPE
MIX
PRIOR NORM
NORM REV
SET /REV
AUTO
TRANS
Transition control block (standard type)
ON
1 2 3 4
KEY4
SUPER
MIX
DME
TRANS
PVW
CUT
PTN LIMIT
KF
LIMIT SET

Key Priority Setting

289