Setting The Key Priority (Transition Control Block); Key Priority Setting Operations (Menu) - Sony XKS-C9111 User Manual

Setting the Key Priority (Transition
Control Block)
Next transition selection buttons
PRIOR SET button
KEY PRIOR button
Transition control block
Note
Setting the key priority is not supported using the
transition control block (simple type).
Changing the key priority
Key priority: 3, 1, 4, 2
Key priority: 1, 3, 4, 2
Select [KEY1].
87
1
Press and hold the [PRIOR SET] and press the [KEY
PRIOR] button to select key priority setting mode.
When the [KEY PRIOR] button is lit green, key
setting mode for after the transition is selected. When
the [KEY PRIOR] button is not lit, key setting mode
for the currently inserted keys is selected.
2
Set the key to display at the front.
Set each group, consisting of key 1 to key 4 and key 5
to key 8.
Press and hold the [PRIOR SET] button and press the
[KEY1] to [KEY4] buttons or [KEY5] to [KEY8]
buttons.
The selected key is set for display at the front within
the group.
To set the key priority for after the transition to the
same setting as the current setting, press and hold the
[PRIOR SET] button and press the [BKGD] button.
Notes
• You can set the key priority within the key 1 to key
4 group and key 5 to key 8 group, but not for
combinations of keys from different groups. For
example, it is not possible to set a sequence of keys
1, 5, and 2.
• The [BKGD] button is active only when in the mode
for changing the key priority for after the transition.
The current key priority can be checked on the
program monitor for the switcher bank.
When the [KEY PRIOR] button is selected in a next
transition, the key priority for after the transition can
be checked on the preview monitor for the switcher
bank.
3
Repeat steps 1 and 2 to set the key priority.
Key Priority Setting Operations
(Menu)
The priority of the key 1 to key 4 group and key 5 to key 8
group (higher/lower) sets the key sequence within each
group.
The keys in the higher group have priority 1 to 4, and the
keys in the lower group have priority 5 to 8.
This section describes setting the key priority on the M/E-1
bank as an example.
Changing the key priority
1
Display the key priority setting menu.
To set the key priority of the currently inserted keys,
open the M/E-1 >Misc >Key Priority menu (1173).