Operation With A Mouse - Sony CCP-8000 Series User Manual

Menu number Menu name
a) Transition >DME
1116.3
Wipe Adjust
a) Edge Direction
1154.1
>Matte Adjust
a) Main Modify
1155
a) Main Modify
1155.1
>Multi Adjust
a) Sub Modify
1156
a) Sub Modify >Multi
1156.1
Adjust
2122.2 Composite
>Pattern Adjust
2131 Reposition
2210
Color Bkgd1
c) Primary CCR
2412.1
>Mask1 Adjust
4116 DME >Edge
>Wipe Crop
4127 DME >Video
Modify >Mask
a) The menu numbers shown by way of example are those for M/E-1: the same applies to M/E-2,
M/E-3, and P/P. Equally, content applying to Key1 applies equally to Key2, Key3, and Key4.
b) The same applies to Color Bkgd2.
c) The menu numbers shown by way of example are those for CCR1: the same applies to CCR2.
d) The sample applies to Mask2 Adjust.

Operation With a Mouse

If you display the menus in an external
monitor, operated with a mouse, then you
click the mouse instead of pressing a button
as described in the previous section, "Menu
Operations."
However, in the following cases there are
special operations with a mouse.
122
Basic Menu Operations
Knob parameters subject to restriction on default recall
Button name
[Position]
[Position]
[Position] in the <Position> group
[Position]
[Position] in the <Position> group
[Position]
[Position]
[Normal]
[Black&White]
b) [Position]
[Position]
d)
[Position/Size]
[Position/Size]
Knob
1
2
1
2
1
2
5
To set parameters
To adjust the value of a knob setting
parameter button with the mouse, you can
use either of the following three methods.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, and turn the mouse
wheel.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, then hold down the right
mouse button, and drag the bar showing
the setting to the desired value.
Parameter
H
V
Position H
Position V
Position H
Position V
Pattern