Adjustment Of Operation Power For Fader Lever - Sony DVS-7200A Installation Manual

5-3. Adjustment of Operation Power for Fader Lever

Without removing the fader from the panel, the operation power of the fader lever is possible to adjust.
(1) Open the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
(2) When adjusting the fader lever (BKDS-7030) with installed to the adaptor box (BKDS-7075), remove
the two screws and the AD panel. (Refer to "2. Adaptor Box" in the section 1-2-3 of the maintenance
manual part 1.)
When adjusting the fader lever in the main panel, remove the CPU-246/263 board. (Refer to "5.
CPU-246 Board" or "6. CPU-263 Board" in the section 1-2-5 of the maintenance manual part 1.)
(3) Turn the screw by an L wrench (across 4.0 mm) and adjust the operation power.
2 : If turning the screw clockwise, the operation of the fader lever become slow.
3 : If turning the screw counterclockwise, the operation of the fader lever become fast.
Fader assy
Hexagon wrench (4.0 mm)
DVS-7200AE IM
5-3. Adjustment of Operation Power for Fader Lever
Screw
5-23