Button
F5 (SIZE): Set the size and
degree of edge softness. →
MAIN
MASK
Keyer Copy Function
It is possible to copy all the settings from one keyer (KEY 1 or DSK) to the
other keyer. The following data values are not copied, however.
• Data in key memory
• Setup data
• Chroma key data
To copy keyer settings
Hold down the button corresponding to the source keyer (KEY 1 or DSK) in
the keyer selection section, then press the other button for the copy
destination.
Key mask setting menu (continued)
Main menu
WIPE F2 (Size): Set the
Submenus
Level 1
size of the pattern.
(0.00 to 100.00)
F3 (Soft): Set the
degree of edge
softness. (0.00 to
100.00)
Chapter 4 Basic Operations for Switching
Level 2
—
—
4-13