Veikong gpd 515/g5 Startup Manual page 84

Parameters are changed by pressing the MENU key to enter the Program mode, then
advancing through the levels of the menu to access the parameter that is desired to be
changed. Only the parameters listed in Table A1-11 (Appendix 1) may be changed while
the drive is running.
Table 4-5. Example 1A: Changing a Parameter in Quick-start Access Level
DESCRIPTION
• Select Programming Mode.
• Select the Parameter Name. Press
• Select the Decel Time 1
parameter setting. (The first
digit of the value to be set
blinks.)
• Change reference value.
• Write into memory.
Top of Main Menu
• Return to Operation.
• Select Operation Mode
(changes to Drive mode).
KEY SEQUENCE
Press , then
MENU
, then
DATA
ENTER
Press
DATA
ENTER
Change value by pressing
RESET
Press
DATA
ENTER
Press
MENU
Press
DATA
ENTER
4-10
DIGITAL OPERATOR DISPLAY
Frequency Ref
U1-01= 0.00 HZ
twice
** Main Menu **
Programming
4 times
Decel Time 1
C1-02= 10.0 sec
Decel Time 1
0010.0 sec
Decel Time 1
0001.0 sec
Entry Accepted
briefly, then
Decel Time 1
C1-02= 1.0 sec
** Main Menu **
Operation
Frequency Ref
U1-01= 0.00 HZ