Veikong gpd 515/g5 Startup Manual page 243

T a b l e A 1 - 3 . D r i v e C X - X X P a r a m e t e r s – C o n t i n u e d
PARAMETER F U N C T I O N
NUMBER N A M E
C8-08 AFR Gain
C8-09 AFR Time
C8-30 Carrier
Frequency
During Auto-
Tuning
NOTES:
1 . Factory setting differs depending on the control method ( A 1 - 0 2 ) .
2 . Setting range and factory setting differ depending on drive capacity and the control
method.
3 . Capability to view and set specific parameters is dependent upon the Access Level
( A 1 - 0 1 ) and Control Method ( A 1 - 0 2 ; 0 = V/f, 1 = V/f w/PG, 2 = Open Loop
Vector, 3 = Flux Vector) the drive is programmed for. Each column represents the
Access Level for a given Control Method: Q = Quick-start; B = Basic; A = Advanced;
— = not available.
D E S C R I P T I O N
0 : Fc = 2 kHz
1 : Fc = C6-01
2 : Fc = 5 kHz
INCRE- S E T T I N G
M E N T RANGE
0.01 0.00 - 10.00
1 ms 0 - 2000
1 0, 1
A1-9
A C C E S S L E V E L
F A C T O R Y
( S e e N o t e 3 )
S E T T I N G
0 1 2
1.00 — — A —
50 — — A —
2 — — A —
P A R A .
REF .
3
5.6
5.6