Jog Reference - Veikong gpd 515/g5 Startup Manual

5 . 2 4 J O G REFERENCE
d 1 - 0 9 : Jog Reference
When jog operation is selected (either by the Digital Operator JOG key, or by external Jog
and Run signals), the drive output will ramp to the output level set by this parameter.
When the Digital Operator is used, Jog can only be initiated from the stopped condition.
When the drive is running, the JOG key will have no effect on drive output.
When an external Jog signal is present, it will override the existing operation mode and the
drive will ramp to the level set by this parameter.
EXAMPLES:
FREQ. CMD
d1-09 JOG
REF.
0
FREQ. CMD
d1-09 JOG
REF.
0
OPERATION FROM DIGITAL OPERATOR
Press and
Hold JOG
Press Press and
RUN Hold JOG
5-36
Factory setting: 6 . 0 0
Range: 0.00 to 400.00 Hz
Release
JOG
Release Press
JOG STOP