Multiple Speed Reference Configuration [Multi-Step Speed Operation] - Veikong gpd 515/g5 Startup Manual

5.25 LOCAL/REMOTE AND REFERENCE SELECTION
5 . 2 5 B M u l t i p l e S p e e d R e f e r e n c e C o n f i g u r a t i o n [ M u l t i - s t e p S p e e d O p e r a t i o n ]
In a multiple reference configuration, four modes may be selected.
In the descriptions of Mode 1 thru Mode 4, the external terminal listings differ
depending on whether the drive is set for 2-wire or 3-wire control. For 3-wire
control, one of these terminals is dedicated to the FWD/REV selection; therefore,
multiple reference operation will use fewer of the memory settings and is a more
limited function.
Depending on the control wiring configuration and the multi-step mode chosen, the motor
can be operated at up to nine different speeds.
Auto
Speed
Ref. (ext.)
OR
OUTPUT
Speed
SPEED
Ref. 1
( d1-01 )
RUN
Multi-step
Select 1
(Term. 5)
Multi-step
Select 2
(Term. 6)
Multi-step
Select 3
(Term. 7)
Multi-step
Select 4
(JOG1)
(Term. 8)
Manual
Speed
Ref. (ext.)
OR
Speed
Ref. 2
( d1-02 )
d1-05
d1-04
d1-03
CLOSED
CLOSED
CLOSED
Typical Multi-step Speed Operation
NOTE
d1-08
d1-07
d1-06
CLOSED
5-40
Continued
Jog
Speed
( d1-09 )
t
CLOSED