Basic Programming - Veikong gpd 515/g5 Startup Manual

4 . 4 B A S I C PROGRAMMING
All parameters are set by accessing them through a menu tree with multiple access levels.
The setting of the Access Level in the Initialization Menu determines which parameters
appear on the Digital Operator. To see Example 1 and 2 in detail, refer to Tables 4-5, 4-6
and 4-7.
Menu Level
(Advanced
Access)
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
The parameters are arranged by groups. The following table shows which Parameter
Group(s) appear under which Mode.
Digital Operator
Modes
Parameter
Groups List *
* For a complete listing of parameters, see Appendix 1.
T a b l e 4 - 2 . P a r a m e t e r M e n u
Reference Name
Digital Operator Mode
Parameter Group
Parameter Function
Parameter Name
Parameter Number
Parameter Setting Value
T a b l e 4 - 3 . P a r a m e t e r G r o u p s
Operation Initialize
U – Monitor A – Initialize
Digital Operator
Display
Example 1
Programming
C – Tuning
C1 Accel/Decel
Decel Time 1
C1-02
10.0 sec
Programming Auto-Tuning
b – Application No Group Name
C – Tuning
d – Reference
E – Motor
F – Options
H – Terminals
L – Protection
o – Operator
4-8
Digital Operator
Display
Example 2
Initialize
—
—
Control Method
A1-02
V/F Control
Modified
Constants
No Group Name