Veikong gpd 515/g5 Startup Manual page 177

5 . 4 1 T H E R M A L OVERLOAD PROTECTION
E 1 - 0 2 : Motor Selection
Setting
0
1
2
This parameter sets whether a general-purpose or a blower-cooled motor is used. The
motor overload detection function operates differently, as shown, for each of these two
motor types.
Electronic Thermal Characteristics
General-purpose motor (TEFC)
Blower cooled or totally enclosed non-ventilated (TEBC or TENV)
Vector Motor
Standard Fan Cooled Motor Overload Curve
L 1 - 0 1 = 0 & L 2 - 0 1 = 8 . 0 M i n u t e s
0 Hz
10 Hz
20 Hz
Continued
40 Hz
60 Hz
5-91
Factory setting: 0
Range: 0 to 2