Centrecom FS980M/9 Command Reference Manual page 287

L C
OGGING OMMANDS
( )
LOG MONITOR FILTER
Parameter Description
rmon
loopprot
poe
dhcpsn
facility
Filter messages by syslog facility.
<facility>
Specify one of the following syslog facilities to include messages from:
kern
user
mail
daemon
auth
syslog
lpr
news
uucp
cron
authpriv
ftp
msgtext
Select messages containing a certain text string.
<text-
A text string to match (maximum 128 characters). This is case sensitive, and must be the last
string>
text on the command line.
Default By default there is a filter to select all messages. This filter may be removed and
replaced by filters that are more selective.
Mode Global Configuration
Examples To create a filter to send all messages that are generated by authentication and
have a severity of info or higher to terminal instances where the terminal monitor
command has been given, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to the terminal, use the following commands:
awplus#
awplus(config)#
613-50137-01 Rev A
Remote Monitoring
Loop Protection
Power-inline (Power over Ethernet)
DHCP snooping (DHCPSN)
Kernel messages
Random user-level messages
Mail system
System daemons
Security/authorization messages
Messages generated internally by syslogd
Line printer subsystem
Network news subsystem
UUCP subsystem
Clock daemon
Security/authorization messages (private)
FTP daemon
configure terminal
log monitor level info program auth
configure terminal
no log monitor level notices program epsr
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
287