Dvmrp Global Configuration - Avaya Cajun P882 User Manual

Chapter 9
Table 9-8. DVMRP Global Configuration Dialog Box Parameters
Parameter
Minimum Flash Update
Interval
Maximum Number of
Routes
Route Report Interval
Route Replace Time
Route Hold Down Time
Prune Message Lifetime
Prune Message Retransmit
Interval
Graft Message Retransmit
Interval
Configuring the
DVMRP Global
Configuration
Using the CLI
9-56
Allows you to...
Enter the update interval (in seconds) between flash
updates. This represents the minimum time between
advertisements of the same route.
Enter the maximum number of routes for this
interface.
Enter the report interval (in seconds) that elapses
between delivery of DVMRP routing table updates.
Enter the amount of replace time (in seconds) before
which a route entry will be removed if it is not
refreshed.
Set the hold down time (in seconds) that the switch
reports unavailable routes with a metric of infinity.
Enter the lifetime (in seconds) that a transmitted
upstream prune message persists.
Enter the retransmit interval (in seconds) between
the transmittal of generated upstream prune messages
on your network.
Enter the retransmit interval (in seconds) between
the transmittal of generated upstream graft messages.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To configure DVMRP globally using the CLI:
<configure># router dvmrp
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
2 of 2