Performing A Reset - Avaya Cajun P882 User Manual

Using the CLI

Performing a Reset

Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 3-10. P880/P882 Cooling System Status window
2. Check the Status column to ensure that all the individual
components are operational.
3. If a component's status is non-operational, power down the
switch and contact a service representative to diagnose the
failing unit.
To display your switch's power system statistics using the CLI, enter
the following command from Configuration mode:
<configure># show system fans
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can reset your switch from either the Web Agent or the CLI.
* Note: You must reset your switch after licensing an
80-Series modules.
To reset your switch using the Web Agent:
* Note: You can also reset your switch using the Module Reset
button located on the Supervisor module. Refer to the
Installation Sheet that came with the Supervisor Module
for details.
1. Select System Reset from the System group on the Web
Agent window. The System Reset Page dialog box opens
(Figure 3-11).
Configuring System Information
3-17