Avaya Cajun P882 User Manual page 139

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
2. Click CREATE. The Create VLAN dialog box opens
(Figure 4-4).
Figure 4-4. Create VLAN Dialog Box
.
3. Enter a name for the VLAN in the Name field.
4. In the ID field, enter an unused VLAN ID value
(between 2 to 4094).
VLAN IDs are global and must be consistent from switch to
switch, even when switches are manufactured by different
vendors.
5. Refer to Table 4-1 to configure the Create VLAN dialog box
parameters:
Table 4-1. Create VLAN Dialog Box Parameters
Parameter Definition
Name Unique Name assigned to the VLAN in a switch. A
maximum of 31 alphanumeric characters
ID Identifier used throughout the network to identify this
VLAN. If you want ports on more than one device to
participate in a particular VLAN, you must use the same
VLAN ID to identify the VLAN on every device.VLAN ID
1 is reserved for the Default VLAN. VLAN ID 4097 is
reserved for the discard VLAN.
Note:
Note:
The switch supports up to 1000 VLANs and a
maximum of 24,000 MAC Addresses.
In order to support the maximum number of
VLANs, VLAN ID numbers should be chosen
from the range of 1 to 1000.
4-9