Displaying The Ipx Route Table - Avaya Cajun P882 User Manual

Parameter
Source
Interface
Network Number

Displaying the IPX Route Table

Parameter
Select
Network
Interface
Source
TTL
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
3. Refer to Table 12-7 to determine the search parameters:
Table 12-7. IPX Route Table Search Parameters
Allows you to...
Search the IPX route table using of the following
parameters:
• RIP - RIP routing updates
• Static - User configuration
• Local - Directly connected routes
Once you select a parameter, you can search to find the
routes associated with that parameter.
Search the IPX Route table using the interface associated
with the next-hop to the IPX network.
Search the IPX Route table using the IPX Network address
(hexadecimal number) you specify.
4. Click on the Search button to start:
If the available routes are found they are displayed in the
—
IPX Route Table dialog box.
If no routes are available, a message is displayed in the
—
IPX Route Table dialog box.
To display the IPX route table:
1. Perform an IPX Route Table search as described in "Searching
the IPX Route Table", section. If available routes are found
they are displayed in the IPX Route Table dialog box.
2. Refer to Table 12-8 to review your configuration:
Table 12-8. IPX Route Table Parameters
Defines the...
Parameter selected.
Network number (in hex) of the IPX network.
Interface associated with the IPX network.
Method by which the network was learned. For
example, RIP, local, or static.
Number of seconds before the route expires.
Configuring IPX Routing
12-21