Creating A Bootp/Dhcp Server Entry - Avaya Cajun P882 User Manual

Chapter 9
Creating IP
Static ARP
Entries Using
the CLI

Creating a BOOTP/DHCP Server Entry

Creating a
BOOTP/DHCP
Server Entry
Using the Web
Agent
9-44
3. Refer to Table 9-6 to configure the Add IP Static ARP
Entry dialog box parameters:
Table 9-6. IP Static ARP Parameters
Parameter Allows you to...
Enter an IP address to associate with the Static ARP
IP Address
entry.
Enter the MAC address of a node to which you want to
MAC Address
create a static ARP entry.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
To create IP static ARP entries using the CLI, enter the following
command in Configure mode:
<configure># arp <ip-address> <hardware-address>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
The BOOTP/DHCP Server Entry allows you to configure a Router as
a BOOTP/DHCP Relay Agent between a BOOTP/DHCP server and
the requesting client.
You can create a BOOTP/DHCP Server entry using either the Web
Agent or the CLI.
* Note: BootP/DHCP must first be enabled in the IP Global
Configuration.
To create a BOOTP/DHCP entry using the Web Agent:
1. Select BOOTP/DHCP Servers from the Routing > IP >
Configuration group on the Web Agent window. The IP
BOOTP/DHCP Servers dialog box opens (seeFigure 9-13).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1