Avaya Cajun P882 User Manual page 423

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Figure 11-6. Add OSPF Virtual Link Dialog Box
3. Enter the new OSPF Link information. Refer to Table 11-4 for
an explanation of the Add OSPF Virtual Link dialog box
parameters:
Table 11-4. Add OSPF Virtual Link Dialog Box Parameters
Parameter
Router ID
Area
Transmit Delay
Retransmit
Interval
Hello Interval
Configuring the OSPF Routing Protocol
Defines the...
Router ID for the far end of the virtual link.
Area ID through which the virtual link travels.
Estimated number of seconds it takes to transmit a
link state update packet over this virtual link. The
value range is 1-3600. The default is 1.
Number of seconds between link-state
advertisement retransmissions for adjacencies
belonging to this virtual link. This value is also used
when retransmitting database description and link-
state request packets. The value range is 1-3600.
The default is 5.
Time in seconds between the Hello packets that the
router sends on the virtual link. This value must be
the same for all routers attached to a common
network. The value range is 1-65535. The default is
10.
11-15