Chapter 12
Configuring IPX Routing Globally
Web Agent
Procedure
Table 12-2. IPX Routing Global Configuration Dialog Box Parameters
Parameter
IPX Routing
Use Default
Route
RIP
SAP
12-4
You can configure IPX routing globally using the Web Agent or the
CLI.
To Enable or Disable IPX routing globally using the Web Agent:
1. Select Global Configuration from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Global Configuration dialog box opens (Figure 12-2).
Figure 12-2. IPX Global Configuration Dialog Box
2. Configure IPX Routing Global Configuration dialog box
parameters to make your switch an IPX router. Refer to Table
Table 12-2 for an explanation of the dialog box parameters.
Allows you to...
Select Disable to prevent IPX from routing globally. The
default value is Enable.
Select Enable if you know the default route. The default
value is Disable.
Select Disable to prevent IPX RIP from routing globally.
This affects all IPX interfaces set up to use the IPX RIP
routing protocol. The default value is Enable.
Select Disable to prevent IPX SAP from routing globally.
This affects all IPX interfaces set up to use the IPX SAP
routing protocol. The default value is Enable.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1