Chapter 15
Using the CLI
Viewing AppleTalk Route Table Statistics
Using the Web
Agent
Using the CLI
15-30
Click Flush Route Table to empty the route table of all
dynamic entries. Static and Local entries are not flushed.
To view the AppleTalk Interface statistics table using the CLI, enter
the following command:
># show appletalk route
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can view AppleTalk route table statistics using either the Web
Agent or the CLI.
To view AppleTalk route table statistics using the Web Agent:
1. Select Route Table Statistics from the Routing >
AppleTalk > Display group on the Web Agent window.
The AppleTalk Route Table Statistics dialog box opens
(Figure 15-23).
Figure 15-23. AppleTalk Route Table Statistics Dialog Box
2. Refer to Table 15-8 for information on AppleTalk Route
Table Statistics dialog box parameters:
Table 15-8. AppleTalk Route Table Statistics Dialog Box Parameters
Parameter
Current Number of
Routes
Peak Number of
Routes
Currently there is no CLI command to show appleTalk Route
Statistics.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
Displays the current number of AppleTalk
routes.
Displays the peak number of AppleTalk routes.