Backing Up The Previous Configuration - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Backing Up the Previous Configuration

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

3. When you download the new switch software, download it to

the other APP memory location. For example, in Figure A-2,

you would download the new software to APP2.

To determine the APP location from which the switch loads the

previous version of software, use the following command:

Avaya>show flash

This command displays information about the application software

that is currently stored in APP1 and APP2. For more information

about this command, see Chapter 29, "System," in the Command

Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice

Before you upgrade the switch software it is advised that the

previous configuration is backed up to a file or directory on a TFTP

server, back up the previous configuration to a file or directory on a

TFTP server. You can use either the Web Agent or CLI to perform

To back up the previous configuration by using the Web Agent:

1. In the navigation pane, expand the System >

Configuration > Configuration Files folders.

2. Select File Management.

The Configuration File Management Web page is

displayed in the content pane (Figure A-3).

Upgrading the Application Software

P550r P580 P880