Using the CLI
Displaying VRRP Statistics
Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
To create a VRRP router from the CLI, enter the following command
in Configure mode:
<config-if:<interface name>># ip vrrp <vr-id>(1-
255) address (ip-address)
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can display VRRP router statistics by using either the Web
Agent or the CLI.
To display VRRP virtual router statistics using the Web Agent:
1. Select VRRP Statistics from the Routing > IP > Display
group on the Web Agent window. The VRRP Virtual
Router Statistics dialog box opens (Figure 9-41).
Figure 9-41. VRRP Virtual Router Statistics Dialog Box
2. To modify the VRRP statistics:
Click CLEAR to reset all the entries.
—
Click REFRESH to receive the most up-to-date
—
information on the entries.
Configuring IP Routing
9-97