Avaya Cajun P882 User Manual page 505

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
4. To change a zone name(s), place a check mark(s) in the
Select column and make the change(s) to the zone name(s).
Click Apply to save the new AppleTalk zone, or either
Delete or Cancel to remove the new zone.
5. Select Interfaces from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Interfaces dialog box re-opens (Figure 15-6)
6. Select the new zone that you just created from the Default
Zone field pull-down menu.
Figure 15-6. AppleTalk Interfaces
7. Make sure there is a check mark next to the interface(s) you
will modify.
8. Select the VLAN to be associated with the interface from the
VLAN field pull-down menu.
9. Enter the new port metric to be associated with the interface
in the Metric field.
10. Select the new frame type to be associated with the interface
from the Frame Type pull-down menu.
11. Enter the new network range start number in the Network
Range Start field.
12. Enter the new network range end number in the Network
Range End field.
13. Enter the new network number to be associated with the
interface in the Network Number field.
14. Enter the new node number to be associated with the
interface in the Node field.
15. Select Enable from the Admin. State field pull-down
menu.
16. Select the new default zone associated with the interface
from the Default Zone field pull-down menu.
Configuring AppleTalk Routing
15-9