Using the CLI
Replacing the Primary Controller
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 7-4. Switch Fabric Status Dialog Box
To enable the redundant hardware by using the CLI, enter the
following command from Enable/Configure mode:
<configure># set fabric configure-redundant-
hardware enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
If a Primary controller fails, notification is provided by:
An event log message
An error message that displays in the Switch controller
field.
Configuring Redundancy Options
7-7