Setting Up A Port Mirror On A Switch In Fabric Mode 1 - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Setting Up a Port Mirror on a Switch in Fabric Mode 1

Table 19-2. Port Mirroring Information Web Page Parameters

Configure Source

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

Analyzing Network Performance By Using RMON and Ethernet Statistics

You can set up a port mirror on a switch in Fabric Mode 1 by using

either the Web Agent, the CLI, or SNMP. Fabric mode 1 port

mirroring works with 50-series modules.

* Note: Do not use a router port as a piggyback port.

* Note: Do not set port mirroring on disabled ports.

* Note: You must establish a link to a mirror port before you

setup a port mirror with a piggyback port. Otherwise,

the port mirror will not work.

To set up a port mirror on a switch in Fabric mode 1 by using the

1. Select Sampling from the Port Mirroring group on the Web

Agent window. The Port Mirroring Information Web page

opens (Figure 19-4).

Figure 19-4. Port Mirroring Information Web Page

2. Refer to Table 2 for an explanation of the fields on the Port

Mirroring Information Web page.

Select the configuration source port. Provides a link to the

Port Mirroring Configuration Web page.

Displays the port under investigation.

P550r P580 P880