Creating Trusted Rip Neighbors - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the CLI

Creating Trusted RIP Neighbors

Using the Web

To modify RIP interfaces parameters using the CLI enter the

following command from Configure mode:

(configure)# interface <intf-name> | [type {mbna |

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3.1 for details about this

Trusted RIP neighbors enable you to enhance the switch's security

by enabling one or more neighbors to relay RIP information.

* Note: Adding one or more trusted RIP neighbors ensures that

your router accepts only information from these

neighbors. Consequently, all other information is

filtered. Do not create trusted RIP neighbor(s) if you do

not wish to filter RIP information from the network.

You can create a trusted neighbor using either the Web Agent or the

To create a trusted RIP neighbor using the Web Agent:

1. Select Trusted Neighbors from the Routing > IP > RIP

group on the Web Agent window. The RIP Trusted

Neighbors dialog box opens (Figure 10-3).

2. If a RIP Trusted Neighbor hasn't been configured, only the

CREATE button appears in Trusted Neighbor Dialog Box.

Figure 10-3. RIP Trusted Neighbors Dialog Box

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1

P550r P580 P880