Displaying Ospf Links - Avaya Cajun P882 User Manual

Chapter 11

Displaying OSPF Links

Using the Web
Agent
Parameter
State
IP Address
Area ID
Type
DR Router ID
DR Address
BDR Address
Using the CLI
11-24
The OSPF link display provides information on the currently active
OSPF links. You can display the OSPF using either the Web Agent or
the CLI.
To display OSPF links using the Web Agent:
1. Select Links from the Routing > IP > OSPF group on the
Web Agent window. The OSPF Links dialog box opens
(Figure 11-10).
Figure 11-10. OSPF Links Dialog Box
2. Refer to Table 11-7 for an explanation of the OSPF Links
dialog box parameters:
Table 11-7. OSPF Link Parameters
Displays the...
State of the OSPF link.
IP address of the OSPF link.
Area ID (IP address) associated with the OSPF link.
Type of OSPF link.
Router ID of the designated router.
IP address of the designated router.
IP address of the designated border router.
To display OSPF links using the CLI, enter the following command
from Enable mode:
># show ip ospf interface
># show ip ospf virtual-links
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1