Deleting An Appletalk Interface - Avaya Cajun P882 User Manual

Chapter 15
Using the CLI

Deleting an AppleTalk Interface

Using the Web
Agent
15-10
17. Select the AppleTalk interface that you want to update in
the Select column.
18. Click APPLY to save your changes, or CANCEL to restore
previous settings.
*Note: You may select and change multiple interfaces
simultaneously with one APPLY operation.
To edit an AppleTalk interface using the CLI, enter the following
command from Interface mode:
(config if-:<interface-name>)# appletalk <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can delete an AppleTalk interface using either the Web Agent
or the CLI.
To delete an AppleTalk interface using the Web Agent:
1. Select Interfaces from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Interfaces dialog box opens (Figure 15-7).
Figure 15-7. AppleTalk Interfaces Dialog Box
2. Select the AppleTalk interface that you want to delete from
the Select column.
3. Click DELETE to remove the AppleTalk interface.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1