Setting Log Size - Avaya Cajun P882 User Manual

Chapter 17
Viewing Event
Statistics Using
the CLI

Setting Log Size

Setting Log Size
Using the Web
Agent
17-16
2. Refer to the Table 17-6 for an explanation on the Event
Statistics window parameters.
Table 17-6. Event Statistics Window Parameters
Parameter
Event Log wraps
Events dropped
due to overload of
event system
Events dropped
due to event
system queue full
To view a specific number of event statistics using the CLI, enter the
following command from Configuration mode:
<configure># show logging <num-events>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about these
commands.
You can set the log size using either the Web Agent or the CLI.
To set the log size using the Web Agent:
1. Select General Events from the Events group on the Web
Agent window. The General Event Management dialog
box opens (Figure 17-3).
2. In the Event Log field, select the number of entries that you
want the event log to store.
The default setting is 512 entries.
3. In the Shutdown Log field, select the number of entries that
you want the shutdown log to store.
The default setting is 16 entries.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
Displays the number of times the Event Log has
wrapped. The Event Log may or may not wrap,
depending on how many events have been sent to
the Event Log and when it was last cleared. When
the event log does wrap, the old events are
discarded and replaced with the newest events.
Displays the number of events that were dropped
to prevent overloading.
Displays the number of events that were dropped
due to a full Event System queue.