Avaya Cajun P882 User Manual page 597

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Monitoring and Configuring the Forwarding Cache
For example, if you want to find all entries in the Forwarding
Cache by a VLAN, you would select the VLAN from the
Search By column, and select the appropriate VLAN from
the pull-down menu.Figure 18-4 is the actual display results
from a Forwarding Cache search done by a VLAN.
Refer to Table 18-3 for an explanation of the Route Cache
Entry Search dialog box parameters:
Table 18-3. L3 Forwarding Cache Entry Search Dialog Box
Parameter
Destination Address
Source Address
Protocol
Destination Port
Source Port
Comparison Value
VLAN
Rule Number
Fabric/Chip Index
Parameters
Allows you to search for all entries...
Within the routing cache that match the
specified destination address (IP address), or
IPX network number
Within the routing cache that match the
specified source address (IP address), or IPX
network number
By protocol identifier. By default, this field is 0
for IP.
Within the routing cache that match the
specified destination port (IPU, IPM, IPX).
Within the routing cache that match the
specified source port (IPU, IPM, IPX).
Within the routing cache that match the
specified comparison value (TCP/UDP). Values
include:
• DA - Destination address
• DASA - Destination and source address
• DAPROT - Destination address and
protocol
• DADP - Destination address and
destination port number
• DASAPROT - Destination and source
address and protocol
• DASADPSP - Destination and source
address, and the corresponding
destination and source port numbers
Within the routing cache that match the
VLANs listed in the pull-down menu.
Within the routing cache that matches the
specified rule number associated with an
access list.
Match the Forwarding Chip that is associated
with the fabric port ID.
18-7