CLI Command
Creating a VRRP Virtual Router
Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
To enable an VRRP on an interface using the CLI, enter the
following command in Configure/Interface mode:
<config-if:<if name>># ip vrrp
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can create a VRRP router using either the Web Agent or the
CLI.
To create a VRRP router from the Web Agent:
1. Select VRRP from the Routing > IP > Configuration group
on the Web Agent window. The VRRP Virtual Routers
dialog box opens (Figure 9-39).
Figure 9-39. VRRP Virtual Routers Dialog Box
2. Select CREATE. The Add VRRP Virtual Router dialog box
opens (Figure 9-40).
Configuring IP Routing
9-93