Avaya Cajun P882 User Manual page 305

Table 9-3. Create Standard IP Access List Dialog Box Parameters
Parameter
Access Type
Source Subnet
Creating
Extended
Access Rules
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Allows you to...
Select the method of handling incoming datagrams based on
the IP access type from the following pull-down menu
options:
• Deny/Filter - Allows you to filter out (drop) packets
based on the specified configuration.
• Permit/Fwd pri8 (high) to pri1 (low) - Allows you to
prioritize traffic based on the specified configuration.
• Permit/Fwd with no change in priority - Allows you
to forward traffic with no change in priority.
• Source Address - Enter the IP address that you want to
deny or grant access to the switch. The Wildcard will
determine how the address is evaluated.
• Source Address Wildcard - Enter the Wildcard for this
address. See the section
page 18
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
To create Extended Access Rules:
1. Select Access Lists from the Routing > IP >Configuration
group on the Web Agent window. The IP Access List dialog
box opens (Figure 9-6).
*Note: The IP Access List dialog box displays all standard
and extended access rules that have been created.
If no rules have been created, the following
statement displays: No IP Access Rules are
currently configured.
2. Select Create Extended. The IP Extended Access Rule
Creation dialog box opens (Figure 9-8).
"What are Wildcards?" on
for more information on Wildcards.
Configuring IP Routing
2 of 2
9-23