Avaya Cajun P882 User Manual page 517

Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 15-18. Add AppleTalk Zone Filter Dialog Box
3. Refer to Table 15-4 to configure the Add AppleTalk Zone
Filter dialog box parameters:
Table 15-4. Add AppleTalk Zone Filter Dialog Box Parameters
Parameter Definition
Access List Enter the access list number to be associated with the
zone filter. Valid values are 632-663.
Name Enter the name of the zone to be filtered. You can also
leave this field blank for wildcarding.
Type Select the type of filtering. The options include:
• Deny
• Permit
Interface Select the interface to apply this filter to.
4. Click APPLY to add the new zone filter, or CANCEL to
restore previous settings.
To create an AppleTalk zone filter using the CLI, enter the following
command from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> zone
<string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Configuring AppleTalk Routing
15-21