Chapter 9
Creating a
Multinet
Interface
9-14
together in VLAN-A allowing computing resources on network
192.168.10.x to communicate with computing resources on
network 192.168.60.x without having to go through a router. To
create a multinetted network, you must assign multiple subnets to a
VLAN.
* Note: Only one subnet can be BootP/DHCP Gateway. The
second subnet must use Static IP addresses.
Figure 9-5. Multinet Diagram
Ports
Avaya
Multiservice
Switch
VLAN-A
To create a multinet interface:
1. Select Interfaces from the Routing > IP > Configuration
group on the Web Agent window. The IP Interfaces dialog
box opens (Figure 9-2).
2. Select CREATE. The Add IP Interface dialog box opens
(seeFigure ).
3. Enter a name for the interface in the Interface field.
4. Select a VLAN for this multinet interface from the VLAN
field pull-down menu.
5. Enter the network address associated with this interface in
the Network Address field.
6. Select CREATE from the bottom of the Add IP Address
dialog box. The IP Interfaces dialog box re-opens with the
new interface name listed in the Interface field.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Server
192.168.60.0
192.168.10.0
Ethernet
segment
PC
PC