Viewing The Appletalk Route Table - Avaya Cajun P882 User Manual

Chapter 15
Using the CLI

Viewing the AppleTalk Route Table

Using the Web
Agent
15-28
2. Refer to Table 15-6 for information on the AppleTalk
Interface Statistics Table parameters:
Table 15-6. AppleTalk Interface Statistics Table Parameters
Parameter Definition
Interface Displays the name of the AppleTalk interface.
Network Displays the network range associated with the
Range AppleTalk interface.
Network Displays the network number of this node.
Number
Node Displays the node number of this node.
Seed Displays whether the AppleTalk interface seeded the
network.
State Displays the state of the AppleTalk interface. The
options include:
To view the AppleTalk Interface statistics table using the CLI, enter
the following command from Config mode:
# show appletalk interface brief <CR> |
<interface-name>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can view the AppleTalk route table using the Web Agent or the
CLI. You can also delete single entries from the table, or flush all of
the routes from the table.
To view the AppleTalk route table, and delete or flush entries from
the table using the Web Agent:
1. Select Route Table from the Routing > AppleTalk >
Display group on the Web Agent window. The AppleTalk
Route Table opens (Figure 15-22).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
• Up - indicates that the AppleTalk interface is
active.
• Down - indicates that the AppleTalk interface is
inactive.