Avaya Cajun P882 User Manual page 192

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Flow Control

12. Select Enable from the Remote Fault detect field pull

down menu to detect

13. Click APPLY to save your changes, or CANCEL to restore

previous settings.

Refer to Table 5-3 provides a more detailed description of the

Detailed Physical Port dialog box parameters.

Table 5-3. Detailed Physical Port Dialog Box Parameters

A user-definable name for this port (possibly a drop

connection name or the name of the station or other

device connected to the port).

The User Port option is intended for use with switch

connections to end user nodes. It is intended for use with

switch connections to servers or other switches.

The Service Port allows the switch to generate both log

messages and alarm messages (traps). The User Port only

generates log messages. This prevents your network

management station from being overwhelmed by port

up/down messages that result from users turning

workstations on and off.

Setting this field determines if the IEEE 802.3z pause

control is to be used on this port. The pause mechanism

allows the port to stop a sending station from sending

more packets if the receiving port's buffers are full. This

helps prevent lost or dropped packets.

This feature is recommended for use primarily on end

station connections. Using this feature on trunk ports can

cause unnecessary congestion on the network.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

P550r P580 P880