Avaya Cajun P882 User Manual page 68

Chapter 2
2-10
open the Web Agent. For information about how to change
the TCP port for HTTP requests, see
for HTTP and Telnet (page
* Note: You must enter a separate IP address for each
supervisor module interface (console or inband).
For layer 3, you can use can any of the router
interfaces.
3. Press Enter. The Welcome to the Switch Management
window opens.
4. Select Login. The Username and Password Required
window opens (Figure 2-2).
Figure 2-2. Username and Password Required Window
5. Enter a valid user name. The default super user name is root.
Press the Tab key to move to the Password field.
6. Enter a valid password. The default password is root.
7. Select OK. The General Information window opens with
the Web Agent group folders listed on the left (Figure 2-3).
* Note: To optimize security, change the root password
for the system as soon as possible.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Changing the TCP Ports
43).