Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
* Note: If the 48-port mode is different on the Active and
Standby Supervisor modules, the standby Supervisor
module will automatically reset.
To synchronize the Active and redundant CPU's using the CLI. enter
the following command in Enable mode:
># cpu_redundancy sychronize
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for more details about this
command.
Configuring Redundancy Options
7-17