Avaya Cajun P882 User Manual page 334

Chapter 9
Parameter
Select
Interface
IP Address
IP Address Mask
IGMP Version
Maximum Groups
Always be Group
Membership Querier
9-52
Figure 9-18. IGMP Interfaces Dialog Box
2. Refer to Table 9-7 to modify an IGMP interface:
Table 9-7. IGMP Interface Parameters
Allows you to...
Select the interface to be modified.
Displays the IP interface that is configured with IGMP.
Displays the IP address associated with this interface.
Note:
This parameter is not configurable from the
IGMP configuration dialog box.
Displays the subnet mask associated with this interface.
Note:
This parameter is not configurable from the
IGMP configuration dialog box.
Select the IGMP Version (1.0 or 2.0) to be associated
with the IGMP interface.
Enter the number of IGMP Groups that can be active on
this interface. The default value is 32.
Version 1.0 - Select Enable to make this interface the
designated querier. The default is Disable.
Version 2.0 - Select Enable to force this interface to
send queries. The default is Disable which tells the
interface to obey the designated querier election.
Note:
Only the designated router will query hosts on
your network.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
1 of 2